Download document () of 20
Send email
Download
You have exceeded the download limit
This product has been discontinued and is no longer available. For technical support contact FireTechSupport@Eaton.com.
The VoCALL 10 slave exchange unit is used in conjunction with the VoCALL 9 master unit to extend this emergency voice communication system from 10 to 19 lines. This makes this EVC system ideal for small to medium-sized building projects.
VoCALL suits all sizes of installation from one and two outstation systems in small shops like Bon Marche, to a massive 364 line dual network system at Westfield Shopping Centre in London’s White City.
Over the years VoCALL has been installed on several high profile projects in some of the world’s most prestigious sites, from Wimbledon AELTCC and St Pancras stations in the UK to the Marina Towers and Jumeirah Tunnel in the Middle East.
| Product Code | Description |
| CFVCCS10 | 10 Line Slave Exchange Unit |
| Voltage | 230Vac +/- 10% 50/60Hz |
| Internal Power Supply | 14Vdc |
| Supply and Battery | Monitored, open, short, fuses |
| Protection | Deep discharge, short, thermal |
| Battery Size and Type | 1 x 12V VRSLA (size to be determined by local regulations) |
| Mains Fuse | 240V 2A HRC |
| Battery Fuse | 250A PTC |
| Charge Current | 250mA |
| Number of lines | 10 |
| Remote Enable | Short to use / N/A |
| Number | 2 (fault & in-use) / N/A |
| Type | Volt free relay / N/A |
| Contact | 30Vdc 1A / N/A |
| Buttons | 4 navigation keys / N/A |
| Display | 4 lines, 20 characters / N/A |
| Status LEDs | 3 (healthy, call & supply) / 1 supply |
| Fault LEDs | 3 (line, PSU & general) / 1 general |
| Type | Enhanced |
| Cores | 1 off 4 core (1mm CSA Soft Skin) |
| Distance | 10m (max) must be within fire barrier for compliance with current standards |
| Physical | Powder Coated Zintec |
| Weight | 6.5kg / 4.8kg |
| Cut-out | 330mm x 300mm (semi-recessed unit) / N/A |
| Cable Entries | Top: 17 x Cable knockouts (20mm) Bottom: 1 x Cable knockout (20mm |
