The xComfort Switching Actuator is characterized particularly by its small dimensions, high switching performance and extended functionality. Due to the Hybrid switching technology this Switching Actuator can switch a variety of devices/systems such as lighting, ventilation, heating, alarm systems, etc. It can be directly controlled by switches, sensors and Smart Devices.The device can easily be mounted in installation boxes for switches, branch-off boxes or standard installation boxes, or directly inside the cover of the light fixture.

PRODUCT FEATURES

• Switches any type of load: lights, LEDs, pumps, ventilation, heaters, saunas, etc.
• Durable hybrid switching technology
• Local Input Sensor 230 VAC - gives the opportunity to use the existing or any market available switch directly in combination with the Actuator without the need for addition components
• Integrated Energy Measurement with Load Fault Indication
• Supports the Extended Status Messaging format for high status reliability and additional status information in combination with smart devices like the Smart Home Controller

This generation Dimming Actuators is characterized particularly by its small dimensions, robustness, reduced Power Consumption and extended functionality. Due to the smart dimming technology this Dimming Actuator can dim a large variety of loads without flickering, flashing, LED glow or audible noise. Dims even the smallest LED load, starting from 0 W. It can be directly controlled by switches, sensors and Smart Devices. Short circuit, Overload and over temperature protected. The device can easily be mounted in installation boxes for switches, branch-off boxes or standard installation boxes, or directly inside the cover of the light fixture.

PRODUCT FEATURES

• Switches and dims lights
• Design with focus on the dimming of LED lights
• Dims smallest LED loads starting from 0 W
• Selectable and programmable Dim profiles for optimal dimming experience
• Local Input Sensor 230 VAC - gives the opportunity to use any market available push switch directly in combination with the Actuator
• Integrated Energy Measurement with Load Fault Indication
• Supports the Extended Status Messaging format for high status reliability and additional status information in combination with Smart Devices like the Smart Home Controller

The xComfort Heating actuators are used to intelligent control the heating sources, heaters, heating cables and radiator. For water based systems, the silent version (1 A; e.g. for sleeping rooms) is suitable for thermoelectric valve drives and the heavy duty version (10 A and 16 A) to control high load heating sources. Both are equipped with an intelligent algorithm for a smooth temperature regulation offering maximum comfort.

Works wireless with the Room Controller Touch or a smart device (Smart Home Controller) and supports wireless floor temperature sensor for overheat protection.

PRODUCT FEATURES

• Device for electrical heating with energy measurement
• Change second bullet: 10 A and 16 A heavy duty with hybrid switching technology - suitable for all electric heating cables, foil and panels
• 1 A silent (no switching sound) - suitable for thermoelectric valve drives
• Predefined selectable Heating profiles for optimal heating performance
• Integrated Energy Measurement with real time average power indication (SHC)
• Integrated floor under- and overheating protection in case a wireless fl oor temperature sensor is connected
• Supports the Extended Status Messaging format for high status reliability and additional status information in combination with Smart Devices like the Smart Home Controller

The shutters/blinds actuator receives signals and controls drives of shutters and blinds with 230 V motors featuring an integrated limit switch. This actuator also offers 2 safety functions (e.g. safety position in case of wind and/or rain, lock-out protection to make sure that the shutter or blind will not close as long as the terrace door is open).

Moreover, some of the shutter/blind actuators have the socalled touch-function in basic mode (i.e. as long as you press and hold the button, the shading will move up or down).

Adapter plugs

PRODUCT FEATURES

• Multi-functional Button with EMS Multi-color status LED - Control the load directly with the local button. Based on the settings the button color indicates the real time power usage, the output status or just off for dark rooms
• Integrated Energy Measurement
• Supports the Extended Status Messaging format for high status reliability and additional status information in combination with Smart Devices like the Smart Home Controller.
• Plug types: F (side earthing), E (earthing pin), G (British standard), J (S13)
• Switching, Dimming, Heating plug
• Colors: Traffic white, Grey 

• Used for the control of panel heating/cooling systems (e.g. floor heating).
• The Room controller, the Room-Manager or the Home-Manager delivers the set and actual temperature to this actuator for the control of the different heating circuits.

• Receives signals, switches a relay and provides an output voltage for terminals such as mixers, heating, ventilation, dimmers, etc. (0-10 VDC actuators) as well as for dimmers and electronic balasts of fluorescent lamps (1-10 VDC actuators).

• Used for controlling radiators, under-floor heating etc.
• Can be controlled via the multi-channel heating actuator, the switching actuator or the dimming actuator