BeamTech - Self-contained beam light

• Variants of 250lm, 500lm, 1000lm and 2000lm light output
• Each light head can reach up to 500lm maximum
• 12 dedicated LEDs in each light head
• E-focus programming: narrow and wide light distribution, programmed by the user
• 1h, 2h and 3h duration

•  Suitable for use in large areas
• Wall and ceiling mounting
• Locking mechanism of light head(s) preventing accidental change of light head(s) configuration
• Degree of protection IP65 and IK07
• CGLine+ technology

• Small Power Supply Unit
• 1 light head from 250 to 500lm light output

• Large Power Supply Unit
• 2 light heads from 500 to 1000lm light output
  

• Small Power Supply Unit
• 2 light heads from 500 to 1000lm light out

• Large Power Supply Unit
• 4 light heads for 2000lm light output

BeamTech is designed to be used for Escape Route or Open area illumination within the same device. Providing the user/installer with the ability to define the light distribution which fits the application. 

Additionally, the user can direct the light output to test the product light direction via a test button and install the light heads to best suit the application.

E-focus programming allows you to select what illumination you need for the application. Both wide area anti-panic lighting and narrow focused illumination is possible from the same fitting. Simply select wide or narrow focus via the test point button.

Narrow light distribution enables installations and ideal for large, escape routes and illumination of safety equipment.

A maximum spacing of up to 36.5m (depending on the variant and product line) between luminaires reduces the number of required light points and an application range from 5m up to 25m for 1Lux enables mounting at the normally occurring heights.

Wide light distribution enables higher height installations and ideal for large and high areas where no fixed escape route is defined, meaning that the complete area must be illuminated.

A maximum spacing of up to 23.1m (depending on the variant and product line) between luminaires reduces the number of required light points and an application range from 2.5m up to 15m for 1Lux enables mounting at the normally occurring heights.