InsulGard

Protective relays and predictive devices

Eaton’s InsulGard predictive diagnostic solution provides continuous, non-invasive online monitoring for generators, motors, switchgear, unit substation dry-type transformers, bus duct and cable connections. InsulGard’s constant tracking of partial discharge activity and predictive monitoring helps users to make better safety and asset management decisions. Advanced filters enhance accurate monitoring, and a user-friendly web interface provides a simple way to monitor device status.

Contact me about this product

Interact with Eaton's InsulGard sales tool

Back to search

Overview Specifications Resources Support

Protect your investment

Equipment life extension

Maximise your uptime

Reduce scheduled maintenance

Mitigate your risk

Insulation failures cost time and money. What’s even more damaging is that insulation failures lead to arc flash events, equipment failure, unscheduled outages or, worst of all, accidents involving your personnel. Eaton’s InsulGard system predicts insulation failures before they occur.

Intuitive user experience

InsulGard reduces the level of expertise required to analyse partial discharge data, with user-friendly software. The software allows for extensive data analysis from simple automated reporting to in-depth analysis by experts.

Core features

Continuous, online monitoring.
Works with generators, motors, switchgear, unit substation dry-type transformers, bus duct and cable connections.
Advanced filters enhance accurate monitoring.
Web interface provides an easy way to monitor device status.
Innovative sensor technology provides best-in-class sensing capability.
Remote monitoring service available through EESS organisation (www.myinsulgard.com).
Factory installed into new equipment or retrofitted into existing equipment.

Eaton's InsulGard

Eaton's InsulGard predictive diagnostic solution provides continuous online monitoring of generators, motors, switchgear, transformers and more!

Specifications

InsulGard partial discharge monitoring

Product specifications

General information

APPLICATIONS

HV and MV equipment (motors, including VFD, switchgear, generators, bus ducts, cable terminations, transformers, etc.)

MOUNTING OPTIONS

In NEMA 4X enclosure
Panel mount
Door (flush) mount

INSTALLATION CATEGORY

TEMPERATURE RANGE

-400°C to +850°C (+700°C for enclosure mount)
UL certified for 00°C to +700°C ambient

RELATIVE HUMIDITY

0%RH – 90%RH

POLLUTION DEGREE

MAXIMUM ALTITUDE (M)

2000

POWER SOURCE

115V/230V AC +/-10%
60/50 Hz

POWER CONSUMPTION OF DEVICE (VA MAX)

15 VA

KEYPAD

4 arrows and 4 function keys

LEDS

InsulGard status: Normal
Warning (alarm 1)
Alarm (alarm 2)
Memory mode
Setting mode

Dimensions

MAIN UNIT

9.2” L x 7” W x 2.5” H(23.4cm x 17.8 cm x 6.4 cm)
4.2 lb (1.9 kg)

DOOR MOUNTED OPTION (MAIN UNIT WITH SENSOR INTERFACE BOARD)

9.2” L x 7” W x 4” H (23.4cm x 17.8 cm x 10.2 cm)
4.6 lb (2.1 kg)

PANEL MOUNTED OPTION

14.8” x 12.9” x 4” (37.6 cm x 32.8 cm x 10.2 cm)
10.3 lb (4.7 kg)

ENCLOSURE (NEMA 4X) MOUNTED OPTION

17.2” L x 15.4” W x 8.8” H (43.7 cm x 39.0 cm x 22.3 cm)
21.6 lb ( 9.8 kg)

PD measurement

NUMBER OF PD CHANNELS

PD CHANNEL MAGNITUDE DYNAMIC RANGE

68 dB

FREQUENCY BANDWIDTH

1-20 MHz

PHASE-RESOLVED PULSE HEIGHT DISTRIBUTION (PRPHD): NUMBER OF MAGNITUDE WINDOWS (3.23 DB EACH)

PHASE-RESOLVED PULSE HEIGHT DISTRIBUTION (PRPHD): NUMBER OF PHASE WINDOWS (150 EACH)

POWER FREQUENCY AT A MONITORED EQUIPMENT (INCLUDING VFD)

3 to 20 Hz, 20 to 400 Hz

SYNCHRONISATION TYPE

Internal and external

MAXIMUM MEASURED PULSE REPETITION RATE

367,300 pulses/second

INTEGRAL PD PARAMETERS

Partial discharge intensity (PDI)
Maximum pulse magnitude (Qmax)
Pulse repetition rate, Trends of PDI and Qmax
Warning by PDI or Qmax
Alarm by PDI or Qmax and by PDI or Qmax trends

NUMBER OF NOISE CHANNELS

CONTINUOUS WATCH (HIGH PD ACTIVITY) FUNCTION

Active between measurements

DATA RECORD TYPES

Full/brief (test/normal)

INTERNAL DATA MEMORY

2 MB. Provides up to 1,000 days of data storage at 4 measurements per day

SELF-TEST AND SELF-CALIBRATION

At powering up and before every measurement

SET-UP

Configurable from keypad and PC

ALLOWED RG-58 COAXIAL CABLE LENGTH TO PD SENSORS

Up to 150 ft (50 m)

Auxiliary inputs

INPUT SPECIFIED FOR TEMPERATURE MEASUREMENT CALIBRATED FOR 100 Ω PLATINUM RTD SENSOR

ANALOGUE INPUTS SPECIFIED FOR CURRENT, VOLTAGE OR HUMIDITY MEASUREMENT

Interfaces

C-FORM DRY-TYPE RELAYS FOR:

C-FORM DRY-TYPE RELAYS FOR: WARNING (ALARM 1) AND ALARM (ALARM 2) PD LEVELS (FULLY CONFIGURABLE)

120 VAC/ 5 A

C-FORM DRY-TYPE RELAYS FOR: DEVICE STATUS

28 VDC/ 5 A

4 TO 20 MA ISOLATED INTERFACE REPRESENTS HIGHEST OR MAX PDI. MAGNITUDE AS PERCENTAGE OF THE ALARM THRESHOLD

Slope is 1 mA per 10%

RS-485 INTERFACE OPTICALLY-ISOLATED (231 ADDRESSES)

Communication protocol: ModBus RTU, binary

ADDITIONAL COMMUNICATION OPTIONS

USB for communication with PC
Ethernet, webpage and FTP

REGULATORY AND STANDARDS COMPLIANCE

UL 61010-1: Second Edition Standard for Electrical Equipment for Laboratory Use, with revisions dated 28 October 2008
FCC Part 15, Subpart B, Class A
CAN/CSA C22.2 No. 61010-1-04, Second Edition, with revisions dated 1 October 2008
IEC61010-1:2001 and EN61010-1:2001
EN61326-1, EN61000-3-2, EN61000-3-3
IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8, IEC61000-4-11

Download Links

Phone

1-800-268-3578

Emergency Service

1-844-438-6782

Find an Eaton Location

Locate a Distributor

Eaton is an intelligent power management company dedicated to improving the quality of life and protecting the environment for people everywhere. We are guided by our commitment to do business right, to operate sustainably and to help our customers manage power ─ today and well into the future. By capitalizing on the global growth trends of electrification and digitalization, we’re accelerating the planet’s transition to renewable energy and helping to solve the world’s most urgent power management challenges.
SWE Toronto