Arc-resistant switchgear is designed to safely contain and redirect arc flash energy away from the operator. Eaton's ArcGard Arc-resistant Magnum DS switchgear has been tested in all three compartments for a full 0.5 seconds (30 cycles), passing the ANSI/IEEE C37.20.7, Type 2B test guide at 100 kA, 508V and 85 kA, 635V, including an industry-exclusive Type 2B rating for the secondary door above the breakers.
View images of Arc-resistant Magnum DS low-voltage switchgear
VOLTAGE |
Up to 600 V |
CONTINUOUS MAIN BUS CURRENT | 1,600 A to 10,000 A |
SHORT-CIRCUIT TOLERANCE | Up to 100,000 A |
CIRCUIT BREAKER AMPS | Up to 6,000 A |
ANSI/IEEE | C37.20.1, C37.51, C37.20.7 |
|
UL |
1558, 1066 |
|
CSA | C22.2 No 31–10 |
|
OTHER CERTIFICATION | ABS |
|
SEISMIC QUALIFICATION | IBC, CBC, UBC Zone 4 |
CONSTRUCTION |
Metal-enclosed |
POWER TERMINATIONS | Rear access |
INSULATING MEDIUM | Air |
ENCLOSURE TYPE | NEMA 1 indoor |
INDOOR SECTION DIMENSIONS | 22-44” w x 72-90” d x 96” h |
OVERCURRENT PROTECTION | Power circuit breaker, UL 1066 |
DEVICE MOUNTING | Drawout |