The Eaton Power-Suppress 100 is a single-phase isolation transformer. More than just efficiency, this power-conditioning isolation transformer offers superior equipment protection against electrical disturbances and safeguards equipment from all forms of electrical noise, including RFI/EMI.
Input voltage | 120, 240, 480 V |
Frequency | 60 Hz |
Common-mode noise | 140 dB @ 100 kHz |
Normal-mode noise | 65 dB @ 100 kHz |
Overload capacity | 600% for 1 cycle, 300% for 30 seconds |
Dielectric strength | 2500 Vac minimum |
Impedance | 3–6% typical |
Efficiency | 93–97% typical |
Input voltage range | +/-10% of nominal rated voltage |
Harmonic distortion | Adds less than 1% THD, under linear loading |
Coil insulation | 200°C |
Temperature rise | 115°C max rise above a 40°C ambient, depending on model |
Electromagnetic interference | <0.2 gauss @ 36 inches |
Audible noise | Less than 50 dBA measured at 3 feet from the noise suppressor |
Operating temperature | 0 to 40°C |
Storage temperature | -20 to 50°C |
Operating altitude | Up to 12,000 feet (without derating) |
Operating humidity | 95% relative (non-condensing) |
Safety agency | UL 1012, UL 1449, cUL listed, ANSI/IEEE C57.12.91 Meets FDD Category A, IEEE C62.41 Category A3 |
Warranty | Two-year warranty complete unit, five-year warranty core and coil |
Rating |
Input plug |
Output receptacle |
500–1,000 VA | 5-15P | 5-20R duplex |
1.8 kVA | L5-20P | (2) 5-20R duplex |
2.4 kVA | L5-30P | (2) 5-20R duplex |
Catalogue number |
Input voltages |
Output voltages |
Output VA |
I/O interface(NEMA) |
H x W x D,inches (mm) |
Weight,lbs (kg) |
Line-cord/receptacle models | ||||||
T100R-0500 | 120 | 120 | 500 | 5-15P/(1) 5-20R2 | 6.49 x 6.1 x 12 (164.8 x 154.9 x 304.8) |
22 (10) |
T100R-0750 | 120 | 120 | 750 | 5-15P/(1) 5-20R2 | 6.49 x 6.1 x 12 (164.8 x 154.9 x 304.8) |
28 (13) |
T100R-1000 | 120 | 120 | 1,000 | 5-15P/(1) 5-20R2 | 6.49 x 6.1 x 12 (164.8 x 154.9 x 304.8) |
31 (14) |
T100R-1800 | 120 | 120 | 1,800 | 5-15P/(1) 5-20R2 | 10.49 x 11.1 x 17 (266.4 x 281.9 x 431.8) |
54 (24) |
T100R-2400 | 120 | 120 | 2,400 | 5-15P/(1) 5-20R2 | 10.49 x 11.1 x 17 (266.4 x 281.9 x 431.8) |
58 (26) |
Terminal style models | ||||||
T100H-0500 | 120/240 | 120/240 | 500 | Hardwired | 6.42 x 6.1 x 12 (163.1 x 154.9 x 304.8) |
22 (10) |
T100H-0750 | 120/240 | 120/240 | 750 | Hardwired | 6.42 x 6.1 x 12 (163.1 x 154.9 x 304.8) |
28 (13) |
T100H-1000 | 120/240 | 120/240 | 1,000 | Hardwired | 6.42 x 6.1 x 12 (163.1 x 154.9 x 304.8) |
31 (14) |
T100H-1800 | 120/240 | 120/240 | 1,800 | Hardwired | 10.28 x 11.1 x 17 (261.1 x 281.9 x 431.8) |
54 (24) |
T100H-2500 | 120/240 | 120/240 | 2,500 | Hardwired | 10.28 x 11.1 x 17 (261.1 x 281.9 x 431.8) |
58 (26) |
T100H-5000 | 120/240 | 120/240 | 5,000 | Hardwired | 10.28 x 11.1 x 17 (261.1 x 281.9 x 431.8) |
86 (39) |
T100H-5001 | 240/480 | 120/240 | 5,000 | Hardwired | 10.28 x 11.1 x 17 (261.1 x 281.9 x 431.8) |
92 (42) |
T100H-7500 | 120/240 | 120/240 | 7,500 | Hardwired | 10.28 x 11.1 x 17 (261.1 x 281.9 x 431.8) |
116 (53) |
T100H-7501 | 240/480 | 120/240 | 7,500 | Hardwired | 10.28 x 11.1 x 17 (261.1 x 281.9 x 431.8) |
111 (50) |
Support from Eaton
Contact the Eaton technical resource team
Phone: (800) 809 2772, option 5, option 2