Download document () of 20
Send email
Download
You have exceeded the download limit
LED Supply and Monitoring module for a LED series connection (1-8 LEDs, 350mA, 1-5 LEDs, 500mA, 1-3 LEDs, 700mA, 1-2 LEDs, 1000mA) with integrated monitoring module for single luminaire monitoring (without additional data line) and 20 addresses for function monitoring (CEWA GUARD Technology).
Three types of LED supply- and monitoring modules are available. The SLS types are suitable for typical standard applications. The SLR types are specially designed for installation in flush-mounted switch boxes. The SLI types meet higher requirements such as supply of up to 8 LEDs, wider temperature range and incl. single LED monitoring.
Switching modes (maintained/non-maintained and switched emergency luminaires) are freely programmable in one circuit without an additional data line to the luminaires in conjunction with suitable emergency lighting systems (with STAR-Technology).
Error message in case of: Interruption in the LED series connection or a short circuit at the output terminals. Safe fault identification even if one LED fails due to Single individual monitoring (SLI technology = Single LED monitoring Intelligence). Extended ambient temperature area from -40°C to +50°C.
Eaton offers a wide range of special ballasts for emergency lighting for installation into existing light fittings. The ballasts include a monitoring module which signals the luminaire’s current status to the central emergency lighting system. This means that only one ballast must be installed into the luminaire, safe operation in the DC voltage range of 186 - 275 V is ensured, and the danger of specifying the wrong ballast is minimised.
By the use of efficient electronic ballasts with automatically reduced luminous flux in battery operation, a considerable reduction of energy is achieved. This saves costs and adds to environmental protection since it provides equal safety with smaller batteries.
With Eaton monitoring modules, electronic ballasts or LED supply modules, luminaires for general lighting systems from any manufacturer can be connected to central battery systems and thus integrated into the building emergency lighting concept.
The modules matched to the requirements of central battery systems installations make it possible to monitor and control up to 20 luminaires in only one circuit. Using the ballasts, luminaires on one circuit can be operated in different switching modes such as maintained light, non-maintained light or switched maintained light.
Here in the case of the N-EVGs (electronic ballasts), the emergency lighting level of each lamp can be individually set for battery operation from 30 to 100 % of the nominal luminous flux. Addressing and adjustment of the luminous flux are performed, as usual, via easy to access coding switches. Please observe our electronic control gear requirements for monitoring third-party luminaires.
Your search "" did not match any documents or products.
| Without individual packaging Order Code |
Individual packaging Order code |
Description |
| lamp socket: T8 / G13 | ||
| 40071352427 | 40071352457 | N-EVG 36W V-CG-S |
| 40071352428 | 40071352458 | N-EVG 58W V-CG-S |
| lamp socket: G5 / 2G7 / G24 q-1 | ||
| 40071352401 | 40071352431 | EVG 13.3 V-CG-S |
| lamp socket: G13 / 2 G 10 / 2 G 11 | ||
| 40071352402 | 40071352432 | EVG 18 V-CG-S |
| lamp socket: G24 q-2 | ||
| 40071352403 | 40071352433 | EVG 18C V-CG-S |
| 40071352851 | Housing with strain relief |
| Rated voltage ranges | 220 - 240 V, 50/60 Hz / 176 - 275 V DC |
| Standby power loss | < 0.5 W (230 V / 50 Hz) |
| Lamp load | EVG 13.3 13W EVG 18 18W |
| Maximum line length | 1 m (ECG - lamp) |
| Type of mounting | To be mounted in luminaires with protection category I or II |
| Degree of protection | IP20 |
| Permissible temperature range | ta = -20 °C to +60 °C |
| Maximal permissible test point temperature | tc = 75 °C |
| Connection terminals | Plug-in terminals 2.5 mm2 / reverse-polarity protected |
| Dimensions in mm (H x L x W) | 27.5 x 140 x 39 |
| Housing material / colour | Flame retardant polycarbonate / grey |
| Weight | 0.07 kg |
| Luminous flux ΦE/ΦN at end of rated operating timer: |
75 % |
| Rated voltage ranges | 220 – 240V, 50/60 Hz / 176 – 275 V DC |
| Energy-Efficiency-Index | EEI = A2 |
| Lamp start | < 1 s with optimum pre-heating |
| Standby power loss | ≤ 1 W (230V / 50 Hz) |
| Maximum line length | 1 m (ECG – lamp) |
| Type of mounting | To be mounted in luminaires with protection category I or II Attention: Functional earth necessary! |
| Degree of protection | IP20 |
| Permissible temperature range | ta = -20 °C to +60 °C |
| Maximal permissible test point temperature | tc = 75 °C |
| Connection terminals | Plug in terminals 1.5 mm2 / reverse-polarity protected |
| Dimensions in mm (H x L x W) | 21 x 360 x 30 |
| Housing material / colour | Flame retardant polycarbonate / grey |
| Weight | 35/39/36 W = 0.166 kg 49 W = 0.174 kg 54/58/80 W = 0.185 kg |
| Luminous flux ΦE/ΦN at the end of rated operating time |
In DC-operation acc. setting 30 - 100 % (10 %-steps) |
