• No special requirements concerning the housing on functionality in case of installation in separate fire areas
• Cost savings as E30 wiring is not required because devices are installed in separate fire areas
• Natural ventilation is generally sufficient due to the closed form and low capacity of batteries
• Additional safety even in case of fire due to the decentralised arrangement of systems
• Simple operation and commissioning based on a smart programming and operating plan
• 230V AC / 220V DC supply voltage selectable to power the escape luminaires and exit sign luminaires to comply with architectural issues
• Standard integrated phase monitor for monitoring general power supply conditions
• Additional phase monitor input including line monitoring for an external phase monitor
• Standard eight digital 230 V input channels for switching each luminaire separately, for example, freely programmable

• Optional webmodule for the automatic monitoring of LP-STAR according to EN 62034
• Optional CG-S interface for connecting to the CG-S bus for CGVision or master/slave operation for connecting several LP-STAR devices
• Shorter inspection time using the CEWA GUARD technology, automatic function monitoring of up to 20 luminaires per circuit
• Reduced installation costs due to the STAR technology, freely programmable mixed operation of switching modes per luminaire in a single circuit without an additional data cable
• Automatic luminaire search function
• Plain text display at the control module for all luminaires
• Flexible data memory for the test log and device configuration using the Secure Digital card
• Absence of retroactive effect of different circuits in case of a short-circuit due to the automatic, selective shut-off function
• EoL shut-off, programmable as standard

2. Connection for end circuits
Double assignment, 2.5mm² solid/flexible

3. Connection for disable switch
Control loop for disabling the system during operating downtimes with differential loop monitoring for short circuit and wire breakage detection.

4. 24V connection for external phase monitors
Power loop for the emergency luminaires with differential loop monitoring for short circuit and wire breakage detection.

5. Connection for potential free indicator contacts and buzzer
Four relays with a separate root, each 1x changeover contact, 24V 0.5A.

6. Connection for digital inputs
Eight freely assignable inputs 230V, programmable as inverted and non-inverted for example turn on emergency lighting as corridor lighting.

7. Optional interface (factory installed)
The interface for connecting to a CGVision can be installed on-site.

8. Webmodule connection

9. Battery connection wires 1-4

1. Separate buttons for:
   Test (emergency luminaire function)
   Function test
   Duration test
2. Three freely assignable function keys
3. Graphical display
4. Logbook and device configuration
   Save the log book and device configuration comfortably on the memory card. Easily programmable on the PC using an SD card reader and including software.
   
5. Seven control buttons for a user-friendly navigation
6. Function display using LEDs