Interruptores automáticos

This eRB6/M device is an electronic residual current protection unit with integrated overload protection (RCBO), which functions are depending on the mains voltage. These electronic combined RCD/MCB circuit-breakers - which are especially designed for applications in British Standard distribution systems - are available with rated currents from 6 to 45 A and in tripping characteristic B or C. The switching capacity is 6 kA (eRB6) or 10 kA (eRBM).

The eRB6 RCD/MCB combination switch is available as a type AC surge current proof up to 250 A and has a permanently connected neutral conductor (l = 600 or 300 mm).

The eRBM RCD/MCB combination switch is available as an AC and pulse current-sensitive "standard type" A. The RCBO is available with two characteristics: B and C. It is impulse current resistant up to 250 A.

Contáctese con ventas

Configure your DBO according IEC/EN 61439-3

Volver a la búsqueda

Visión General Modelos Recursos

rated currents

up to 45 A

Tripping characteristics

B and C

Rated breaking capacity

6 and 10 kA

Características Principales

High quality combined RCD/MCB device
Line voltage-dependent tripping
Specific for applications in the chassis mounted distribution boards, permanently connected neutral conductors
Design width of one module unit only
Contact position indicator red – green
Wide variety of rated tripping currents
Rated currents up to 45 A
Tripping characteristics B, C
Rated breaking capacity
- 6 kA (eRB6)
- 10 kA (eRBM)

Can be sealed with leads in the on and off position
Can be connected to standard busbar (at the lower side)
Guide for secure terminal connection
Comprehensive range of accessories suitable for subsequent installation
Color coded switching toggle for 10 kA versions

IEC Standard quality design

The RCBO line adheres to the IEC standard of IEC/EN 61009 (VDE 0664-20 and 21) – an IEC region as well as European standard for RCDs with integrated overcurrent protection (RCBOs). This applies to both the line voltage-independent and line voltage-dependent RCDs/MCBs with rated currents up to 125 A for fixed installations. All requirements of IEC/EN 61009 are 100 % fulfilled by Eaton's RCBO line. All required standards are printed on the devices.

Suitable RCD/MCB types for all contingencies

Wiring the circuits separately increases the operational safety of an electrical system, because in the event of a ground fault on a separated circuit will allow for that circuit to be opened when tripping limits are exceeded. Often a ground fault can lead to an unintentional disconnection of a residual current protection device when other inputs are protected by the same breaker. This type of nusiance tripping can be prevented by individually wiring the system with several circuit breakers.

Line- and residual current protection

Eaton's high quality standard guarantees comprehensive personal- and equipment protection by combining the functionalities of a residual current circuit breaker with those of a miniature circuit breaker.
Using Eaton's line of RCBOs, your electrical system will increase in safety and reliability.

Online configurator - design your own customized configurations

The xComfort KLV series and our switching and protection devices are based on a modular design so that you can assemble any combination you need. In addition to a number of standard pre-wired distribution boards, Eaton also supplies customized configurations on request. If you are not yet sure which type of distribution board is the right fit for you, simply fill in our configurator with ordering function.

Access the configurator

Especificaciones

Filtros

Filtrar resultados

Pruebe otra búsqueda

Su búsqueda "" no coincidió con ningún documento o producto.

Descargar enlaces

Eaton es una empresa de gestión inteligente de la energía dedicada a mejorar la calidad de vida de las personas y a proteger el medio ambiente. Nos guiamos por nuestro compromiso de hacer negocios de manera correcta, de trabajar de manera sostenible y de ayudar a nuestros clientes a gestionar la energía ─ hoy y en el futuro. Aprovechamos las tendencias de crecimiento global de la electrificación y la digitalización para acelerar la transición del planeta hacia las energías renovables, ayudamos a resolver los retos más urgentes del mundo en materia de gestión de la energía.

xPole Electronic Combined RCD/MCB Device eRB6/M, 1+N-pole