Wireless smart home solution xComfort

The xComfort generation of actuators is driven by Eaton’s commitment to safety and its longtime proven experience in the field of safety electrical power management. No matter when it is used in renovation or new installation projects, the xComfort actuators offer an easy and future proof enhancement of the electrical installation which comes hand in hand with less installation work. This is powered by the robust and proven Eaton xComfort wireless technology which is an easy stand-alone solution and once connected to the xComfort Bridge or Smart Home Controller featuring sophisticated smart home functions whit smart phone support.

Contáctese con ventas

Volver a la búsqueda

Visión General Modelos Recursos

Quality

Designed and Manufactured in Europe

Experience

More than 100 years of Expertise in Power Distribution technology

Easy installation

Easy install for new buildings and renovation projects

Core Features

Easy installation flush-mounted types just 18 mm thick
Easy extension due to wireless communication
No demolition or rewiring is needed
Pig-tails for easy installation
Works with xComfort Bridge and/or Smart Home Controller for APP based control and smart function

Low standby power consumption
Works with a Wireless switch that can be located anywhere
ESM for reliable status information
Types with local input and/or energy measurement sensor
Internal antenna

Switching Actuator

Switches any type of load: lights, LEDs, pumps, ventilation, heaters, saunas, etc.
Durable switching performance due to the patented Hybrid switching technology.
Standby power consumption 230 mW (with EMS 250 mW)
Integrated Energy measurement (EMS) and Load Fault indication
Types with local input for additional control through a traditional mechanical switch

Smart Dimming Actuator

Designed with a focus on dimming of LED lights, already starting from 0W LED loads.
Selectable and programmable Dim profiles for optimal dimming experience.
Standby power consumption 325 mW (with EMS 425 mW)
Integrated Energy measurement (EMS) and Load Fault indication
Types with local inputs for additional control through traditional mechanical switch

Heating Actuator

Intelligent control heating sources, heaters, heating-cables, -foils, -panels, and thermoelectric radiator valves
Predefined selectable Heating profiles for optimal heating performance
Standby power consumption 190 mW (Silent type 250 mW)
Integrated Energy measurement (EMS) with real time average power indication
Integrated floor under- and overheating protection (requires floor temperature sensor)

Shutter Actuator- flush mounted

Controls drives of shutters, blinds, shades etc. which are equipped with a 230 V AC motor up to 3 A
Tracks the actual position of the shades
Supports numerous safety functions
Selectable profiles to optimize the operation
Standby power consumption 190 mW
Types with local input for additional control through a traditional mechanical switch

Shutter Actuator-plug type

Controls drives of shutters, blinds, shades etc. which are equipped with a 230 V AC motor up to 3 A
With common used Hirschmann STAS/K-3 connectors
Tracks the actual position of the shades
Supports numerous safety functions
Selectable profiles to optimize the operation
Standby power consumption 220 mW
Featuring IP44 protection and a broad operating temperature range

Adapter plugs

Adapter plugs types; Switching (12 A), Dimming (250 W) and Heating (12 A) actuator
Available with Side earthing (Schuko, F-type), earthing pin (E-type) or S13 (J-type) plugs
On device push button for local control
Stand equipped with Energy Measurement Sensor
RGB LED indication for status and/or power consumption (can be switch off)
Available with housing and F-type also in grey

Pairing/Unpairing xComfort switches with actuators - How-to

Find here several how-to videos for pairing/unpairing switches with actuators from our xComfort Smart Home Solutions range.

xComfort LeakageStop

Did you know that burst or cracked pipes cause around 65% of water damage?
The xComfort LeakageStop family offers an intelligent solution to protect installations and buildings against water leakage damage. It detects leakages, triggers alerts, and prevents damage by controlling a standard solenoid valve.

Find out more

xComfort RF Radiator Thermostat

The battery powered xComfort RF compatible Radiator Thermostat with a display is suitable to control water based radiators automatically and regulate the room temperature in a time-based way.

Discover more

Analogue Actuator

Receives signals, switches a relay and provides an output voltage for terminals such as mixers, heating, ventilation, dimmers, etc. (0-10 VDC actuators) as well as for dimmers and electronic balasts of fluorescent lamps (1-10 VDC actuators).

Radiator Valve

Used for controlling radiators, under-floor heating etc.
Can be controlled via the multi-channel heating actuator, the switching actuator or the dimming actuator

20 years xComfort smart home solutions

We first introduced xComfort in 2003 as a wireless home automation system, designed to make controlling household devices more convenient and energy-efficient. Over the past 20 years, xComfort has evolved, and we have steadily expanded our range of associated products and services.

Go to anniversary page

Especificaciones

Filtros

Filtrar resultados

Pruebe otra búsqueda

Su búsqueda "" no coincidió con ningún documento o producto.

Descargar enlaces

Eaton es una empresa de gestión inteligente de la energía dedicada a mejorar la calidad de vida de las personas y a proteger el medio ambiente. Nos guiamos por nuestro compromiso de hacer negocios de manera correcta, de trabajar de manera sostenible y de ayudar a nuestros clientes a gestionar la energía ─ hoy y en el futuro. Aprovechamos las tendencias de crecimiento global de la electrificación y la digitalización para acelerar la transición del planeta hacia las energías renovables, ayudamos a resolver los retos más urgentes del mundo en materia de gestión de la energía.

xComfort Actuators