CEAG eXlink Hazardous Area Ethernet/USB Hot Swap Connectors

Certifications and compliances

Type 791 01 / Type 791 02

• Marking accd. to 94/9/EC: Ex II 2 G Ex dem ia II, IIC T6; Ex II 2 D Ex tD A21 IP66 T80°C
• EC-Type Examination Certificate: PTB 00 ATEX 3108
• IECEx Certificate of Conformity: IECEx BKI 07.0034
• Marking accd. to IECEx: Ex e II T6; Ex tD A21 IP66 T80°C
• Permissible ambient temperature: -20°C to +40°C (standard): -55°C to +40°C (optional)
• Protection class: I
• Degree of protection accd. to EN 60529: IP66

Type 731 11

• Marking accd. to 94/9/EC: Ex II 2 G Ex de ia/ib [ia/ib] m IIC T4; Ex II 2 D Ex tD A21 IP66 T80°C
• EC-Type Examination Certificate: PTB 99 ATEX 1044
• Permissible ambient temperature: -20°C to +40°C (standard); -55°C to +55°C (optional)
• Protection class: I
• Degree of protection accd. to EN 60529: IP66

• Hot swap
• Compact design
• High degree of protection: IP66/IP68
• Simple assembly
• Frequency range up to 100 MHz or USB 2.0
• Transfer rate up to 100 MBaud (Ethernet)
• Available for 10 BASE-T, 100 BASE-T
• The sockets of the inlets and receptacles are designed with Ex-de degree of protection have the proven CEAG contacts of shutter-like, punched and specially treated copper-beryllium band, which provides a perfect electrical connection continuously with its large number of contact points
• An Ex-d space around each plug pin provides a reliable Ex-d chamber for explosion protection during connection and disconnection of the connectors in Zones 1, 2, 21 and 22
• All components are equipped with earthing cables, cable stub and pre-assembled RJ plug male/female or USB plug male/female
• With the M20 screw-in thread, the nickel-plated brass (or optional stainless steel) components can be integrated in all flameproof design enclosures, allowing for the use of industrial Ethernet cards/instruments inside without limits

• Enclosure – nickel-plated brass or 316L stainless steel