Download document () of 20
Send email
Download
You have exceeded the download limit
The BiWire and conventional repeater panel is compatible with Eaton BiWire Flexi panel and 8 zone conventional control panel.
The repeater panel can be daisy-chained with up to 3 panels per control panel and can repeat information from any zone of the panel that it is cabled to.
With an integrated power supply, the only wiring required for the repeater panel is the mains input to the power supply unit and the data cable between the fire control panel and each repeater panel.
| BiWire/Conventional Repeater Panel | EFBWCV-REPEATER |
| Input Voltage Range: | 18.75-30.7V |
| Maximum Current Drawn From Battery: | 2.7A |
| Repeater Port (use of this port is outside the scope of EN54): | Type: RS485 Nodes: Up to 3 repeaters and a fire panel |
| Operating Temperature: | -5°C to +40°C |
| Relative Humidity: | 93% +/-3% non-condensing |
| IP Rating: | IP30 |
| Weight (excluding batteries): | 2.25kg |
| Materials: | PC ABS Front and Rear |
| Cable Access: | 29 x 20mm drill positions - Slots for rear cable entry Cable type 2 core 1.5mm, screened fire rated cable, 500m (Max per zone) |
| Standards: | BS5839-pt1 |
Support from Eaton
Contact us
Phone: +91 (0)11 45851811
