EBMC Explosionproof Combination Motor Starters

Certifications and compliances

NEC/CEC

• Class I, Divisions 1 & 2, Groups B, C, D
• Class II, Division 1, Groups E, F, G
• Class II, Division 2, Groups F, G
• Class III

• UL1203 – Hazardous (Classified) Locations
• UL2062 – High AIC Ratings (Interrupting Capacity) for Groups C, D

• C22.2 No. 30

• NEMA/EEMAC 3, 3R, 4*, 4X**, 7BCD, 9EFG, 12

*Enclosure not suitable for NEMA 4 or 4X with cover mounted operators.

**With S752 or S753 option.

• Rugged, corrosion-resistant, cast copper-free aluminum construction (less than 0.4 of 1%)
• Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
• Total compliance to the wiring end room requirements of the National Electrical Code/Canadian Electrical Code
• Semi-clamshell enclosure design, with an external flanged ground joint between body and cover, makes interior components more accessible
• Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adjacent enclosure
• Stainless steel hinges allow the cover to swing well out of the way
• Stainless steel, quick release, captive, hex head cover bolts; stainless steel springs provide clear indication cover bolts are fully retracted from body
• Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers' starters and breakers
• Simple, straightforward installation of breaker and starter on pre-drilled mounting plate within enclosure; mounting plate also field removable
• Circuit breaker motor circuit protector external operating handle can be padlocked in either "ON" or "OFF" positions
• Neoprene cover gasket permanently attached to the cover seals out moisture
• Bodies have top and bottom drilled and tapped entrances for power conduits plus one at the bottom for control conduit; removable reducers are supplied, as standard, to accommodate smaller size conduits; all conduit entrances are plugged
• Tap-on mounting feet
• Optional EMPS control devices may be added to enclosure cover
• Steel bracket for lifting larger enclosures during installation supplied as standard

• Body and cover – copper-free aluminum
• Operating handle – copper-free aluminum
• Operating shafts and bushings – stainless steel
• Cover bolts, hinges, washer and retractile springs – stainless steel
• Interior parts – sheet steel, electrogalvanized