Normprodukter och effektbrytare

This FRBdM in 1+N and 2-pole is a high-quality residual current circuit breaker and miniature circuit breaker combination with line voltage-dependent tripping and a wide variety of rated tripping currents. The built-in electronics precisely monitors where the currents flow. The difference between harmless and critical residual currents will be detected. Its integrated digital technology offers predictive diagnostics of the level of leakage current via LED indication.

The FRBdM-RCD/MCB is compatible with Busbars. A twin-purpose terminal (lift/open-mouthed) is available for easy and quick mounting at the top and bottom.

Kontakta vårt försäljningsteam

Tillbaka till sökning

Översikt Modeller Resurser Support

Accuracy

Electronic tripping

Standards

IEC/EN 61009

LED indication

for immediate live status

Viktiga egenskaper

High-quality RCD/MCB device combination
Line voltage-dependent tripping
Three LEDs provide information about the rated residual current of the RCBO
Tripping indicator (white - blue)
Contact position indicator (red - green)
Rated currents up to 25 A
Tripping characteristics B, C, D
Rated breaking capacity 10 kA
Extremely precise tripping characteristics
Wide selection of rated residual currents
Twin-purpose terminal (lift/open-mouthed) above and below
Busbar positioning options for line and load terminals
Free terminal space despite installed busbars
Guide for secure terminal connection
3-position DIN rail clip, allows easy removal from existing busbar system
Wide range of accessories suitable for installation

All in one device

Eaton's high quality standard guarantees comprehensive personal- and equipment protection by combining the functionalities of a residual current circuit breaker with those of a miniature circuit breaker. This means our customers spend less time and effort wiring while still protecting the system against overload, short circuit and residual current. Deploying Eaton's line of RCBOs increases your system reliability and safety.

Suitable RCD/MCB types for all contingencies

Separate end circuits increase the system availability and operational safety to a high extend. Faults will affect only an end circuit and not a root protection device and provides additional ease at finding a fault. Furthermore, a root RCD will have to work with various noises and an added sum of leakage currents during normal operations, which could lead in the worst case to unwanted nuisance tripping. Protecting circuits individually against residual currents guarantees highest system availability!

Type A: Protects against special forms of DC residual currents.

Type G: Protects against nusiance tripping.

Type F: Higher immunity against smooth DC currents and enhanced surge current proof capabilities.

IEC Standard quality design

Eaton´s RCBOs adhere to IEC / EN 61009 – a standard covering residual current operated circuit-breakers with integral overcurrent protection (RCBOs) for fixed installation up to 125 A.

All requirements according to the product standards are fulfilled and applicable additional standards are printed onto the device itself.

Type F for industrial applications and machinery

Outages of machines are costly and finding the reason can be problematic. Often the reason can be that modern machines have modern loads built into them. Mains filters can cause disturbances to the incoming line and can change the behavior of the RCD in series. More often, loads have single phase inverters built in. High frequency- and extended DC-immunity incorporated in a protection device with high surge current proofness enables the next generation of machines to become safe above the standard.

Specifikationer

Filtrera

Sök inom dessa värden

Försök med en annan sökning

Din sökning "" matchade inte några dokument eller produkter.

Nedladdningslänkar

Kontakta teknisk support

Ring teknisk support

08-598 940 50

Utbildning

Garanti

Villkor

Eaton är ett intelligent energihanteringsföretag som verkar för att förbättra livskvaliteten och miljön för människor globalt. Vi styrs av vårt engagemang för att göra affärer på rätt sätt, att verka hållbart och att hjälpa våra kunder hantera energi ─ idag och långt in i framtiden. Genom att dra nytta av globala tillväxttrender för elektrifiering och digitalisering påskyndar vi planetens övergång till förnybar energi och bidrar till att lösa världens mest akuta energihanteringsutmaningar.

xEffect Combined RCD/MCB Device FRBdM, 1+N and 2-pole