DC-växling

With Eaton's Moeller series fireman's switches, the sun’s energy can be safely and efficiently harnessed. In the event of a fire, DC voltages of up to 1,000 V often continue to be present on the modules and the cables, even after the inverter has been enabled, making it almost impossible for firefighters to do their job. Fireman’s switches ensure the safety of firefighters by making it possible to disconnect the cables leading from the solar modules to the inverter at the touch of a button, either on site or via the local power utility.

Kontakta vårt försäljningsteam

Tillbaka till sökning

Översikt Modeller Resurser Support

Automatic:

undervoltage releases

Temperature range:

-25 °C to +60 °C

Viktiga egenskaper

Rated operational voltage: 1,000 V
Rated operational current of each switch-disconnector: 30 A
Utilization category: DC-21A
Rated operational current Ie: 30 A
Remote tripping with integrated undervoltage release: 230 V, 50 Hz
Pre-wired for connection
Signaling of switch states via auxiliary contacts (1 N/O and 1 N/C)
Pressure compensation plug
Various connector types are available: MC4 or metric cable glands
Internal resistance of each switch-disconnector: 7 mΩ

De-energized at the touch of a button

The fireman’s switch must be installed along the DC cable in the immediate vicinity of the PV modules. As soon as the location of the fire has been disconnected from the local power supply, or the PV system has been deactivated locally, the undervoltage release in the fireman’s switch will automatically switch off the PV modules.

SOL30-Safety

For small photovoltaic systems with one or two identical strings, the basic version of Eaton's proven fireman’s switch is ideal. With a current carrying capacity of 30 A (26 A) at 1,000 V DC, it can safely switch all standard module types.

SOL30X-Safety

For photovoltaic systems consisting of several strings, Eaton offers pre-wired fireman's switches that combine 2, 3, 4 or 6 switch-disconnectors inside a single enclosure. In contrast to generator junction boxes, the individual strings are not connected in parallel, but can be separately connected to the inverter. This enables the use of multiple MPP trackers and helps to optimize the performance of the inverter.

Simple and protected

The fireman's switches are available with metric cable glands or MC4 sockets. For devices with metric cable glands, all cables connect via terminal blocks. As a result, installing the devices is quick and simple. The IP65 enclosure and the pressure compensation plug make the fireman’s switches ideal for outdoor use.

Specifikationer

Filtrera

Sök inom dessa värden

Försök med en annan sökning

Din sökning "" matchade inte några dokument eller produkter.

Nedladdningslänkar

Teknisk support

För teknisk support, fyll i formuläret eller ring +46 (8)-598 940 50 (val 2).

Kontakta teknisk support

Ring teknisk support

08-598 940 50

Utbildning

Garanti

Villkor

Eaton är ett intelligent energihanteringsföretag som verkar för att förbättra livskvaliteten och miljön för människor globalt. Vi styrs av vårt engagemang för att göra affärer på rätt sätt, att verka hållbart och att hjälpa våra kunder hantera energi ─ idag och långt in i framtiden. Genom att dra nytta av globala tillväxttrender för elektrifiering och digitalisering påskyndar vi planetens övergång till förnybar energi och bidrar till att lösa världens mest akuta energihanteringsutmaningar.

SOL30/SOL30X-Safety solar switch