D, DV single-phase reclosers

Reclosers

Eaton's Cooper Power series D and DV hydraulically controlled automatic circuit reclosers provide reliable, economical overcurrent protection for distribution systems. Additionally, the reclosers use oil as the arc-interrupting medium and provide single-phase load protection, tripping and automatic clearing of temporary faults.

Contact me about this product

Back to search

Overview Technical Resources

High interrupting rating

Cost-effective solution

Hydraulic control

Lower operation and installation costs

Multiple series-trip coils

Simplify system coordination

Core features

Sectionalizes single-phase branches of three-phase feeders
Offers high, continuous current and interrupting capacity used on heavily loaded circuits with high-available fault currents
Provides single-phase load protection, tripping and automatic clearing of temporary faults
Features a compact and self-contained operation design
Coordinates with circuit breakers, sectionalizers, fuses and other reclosers in the distribution system
Supplies the energy for contact closing and stores energy in the trip mechanism with its closing solenoid
Uses oil as the arc-interrupting medium

Ready for use on heavily loaded circuits

Eaton's Cooper Power series D and DV reclosers sectionalize single-phase branches of three-phase feeders. The high continuous current and interrupting capacity of the D and DV reclosers enables them to be used on heavily loaded circuits with high available fault currents.

High-voltage solenoid recloser closing

Tripping is initiated by a series-trip coil that releases the stored-energy trip mechanism when an overcurrent occurs. Current-carrying and interrupting capacities depend on the current rating of the series trip coil. A closing solenoid supplies the energy for contact closing and also stores energy in the trip mechanism.

Specifications

Standards

Eaton's Cooper Power series reclosers are designed and tested in accordance with the following ANSI standards: C37.60 and C37.85 and ANSI Guide C37.61

Ratings

Recloser		D	DV
Nominal voltage (kv)		2.4-14.4	24.9-34.5
Maximum design voltage (kv)		15.5	38
Impulse withstand (BIL), 1.2 x 50 microsecond wave, crest (kv)		110	150
60-hz, withstand (kv rms)	Dry, one minute	50	70
60-hz, withstand (kv rms)	Wet, ten seconds	45	60
Maximum continuous current (amps)		560	560
Reclosing time (seconds)		2	2
Bushing creepage distance (inches)		11-5/8	17

Minimum trip and interrupting ratings

Trip coil ratings continuous amps	Minimum trip ratings (amps)	Interrupting Ratings (rms symmetrical apps)
		Type D			Type DV
		@4.8 kv	@8.32 kv	@14.4 kv	@24.9, 34.5kv
100	200	6000	6000	6000	6000
140	280	8400	8400	8400	8000
160	320	9600	9600	9600	8000
185	370	11100	10000	10000	8000
225	450	12000	10000	10000	8000
280	560	12000	10000	10000	8000
400	800	12000	10000	10000	8000
400x	560	12000	10000	10000	8000
560	1120	12000	10000	10000	8000
560x	750	12000	10000	10000	8000

Optional accessories

Multi-ratio bushing-current transformers for field installation 600:5 for metering
- Slip-on bushing current transformer kit
Mounting equipment
- Pole-mounting cluster-type frame for three-type reclosers
Phase-to-ground neutral closing coil operating voltage +/-15% (kV)
- 2.4
- 4.16-4.8
- 7.2-7.62
- 8.0-8.32
- 14.4
- 20.0
Low-voltage closing coils (Vdc) [Type DV recloser only]
- 125
- 250

Download Links

Looking for software, firmware and programming information?

You can access software, firmware, and associated documentation when you log into MyEaton by clicking Sign in at the top right of this Eaton.com page.

Log in using your existing MyEaton.com credentials.
- If you do not have an account, you can also register for an account by clicking Sign in at the top right of this page and then select Request access now.
Once you are logged in, the software, firmware and associated documentation for this product will appear in the below list.
- Upon sign-in, you may be directed to the MyEaton home page. You will need to navigate back to this page to see the software, firmware and documentation.

Software and firmware download page

Once you are logged into MyEaton, select Tools from the MyEaton menu in the top right of the page.
You will see a link titled “Power Systems Division software and firmware downloads.”
This page is a list of all software and firmware that is available for you to download.

Visit this page for information on earlier models.

Additional literature

Learn about the fundamentals of reclosers

Learn more

Eaton is an intelligent power management company dedicated to improving the quality of life and protecting the environment for people everywhere. We are guided by our commitment to do business right, to operate sustainably and to help our customers manage power ─ today and well into the future. By capitalizing on the global growth trends of electrification and digitalization, we’re accelerating the planet’s transition to renewable energy and helping to solve the world’s most urgent power management challenges.

D, DV single-phase reclosers

Core features

Ready for use on heavily loaded circuits

High-voltage solenoid recloser closing