Front Access Magnum PXR low-voltage switchgear combines the robustness of UL 1558 low-voltage switchgear with the flexibility of UL 891 switchboard design. The front-accessible switchgear offering allows mounting against a wall, corner or in other tight locations where a standard rear-accessible switchgear lineup would not normally fit. Front access switchgear is available with the same Magnum circuit breakers with Power Xpert Release trip units as rear-accessible switchgear.
In this video, Eaton engineers discuss what low-voltage switchgear is, design options, main features and safety technologies.
When providing redundant power sources for critical power applications, select the:
| VOLTAGE |
Up to 600 V |
| CONTINUOUS MAIN BUS CURRENT | 1,600 A to 6,000 A |
| SHORT-CIRCUIT WITHSTAND | Up to 100 kA |
| SHORT-TIME WITHSTAND | 30 cycles |
| CIRCUIT BREAKER AMPS | Up to 6,000 A |
| ANSI / IEEE | C37.20.1, C37.51 |
|
| UL |
1558 and 1066 | |
| CSA |
C22.2 No. 31-10 |
|
| OTHER CERTIFICATIONS | ABS |
|
| SEISMIC QUALIFICATION | Contact factory |
| CONSTRUCTION |
Metal-enclosed |
| POWER TERMINATIONS | Front access |
| INSULATING MEDIUM | Air |
| ENCLOSURE TYPE | NEMA 1 indoor, NEMA 3R outdoor |
| INDOOR SECTION DIMENSIONS | 18-44” w x 40.2” d x 96” h |
| OVERCURRENT PROTECTION | Power circuit breaker, UL 1066 |
| DEVICE MOUNTING | Draw-out |
Send email
