Photoelectric sensor

• Sensor Housing: This portion of the sensor provides the means for mounting and protects sensor internals
• Sensing Face: Light from the sensor emanates from here
• Mounting Nuts: Supplied with each sensor
• Sensor Endbell: Indicator LEDs typically appear in this área of the sensor
• Connection Interface: A sensor may be equipped with a factory installed cable, cordset, or built-in pin connector

Commet 18 mm tubular

Eaton's commet photoelectric sensors series is a complete line of high performance, 18 mm tubular devices with a variety of models and modes to solve virtually any sensing problem. The commet Series includes AC/DC and DC-only models with two-, three- and four-wire circuitry. Choose from cable or micro-connector. 

• Perfect Prox technology provides exceptional background rejection and application problem-solving
• The industry's only background rejection sensors with a 2-wire circuit design
• Solid polyurethane housing completely encapsulates internal circuits for high resistance to shock and vibration
• Adaptable modulation circuit provides immunity to crosstalk from other closely mounted sensors

Enhanced 50 photoelectric sensor

Enhanced 50 series high-performance sensors offer flexibility, durability and high optical performance with a fully potted construction that makes these sensors ideal for use in areas subject to washdown, high shock and high vibration.

• High optical performance models including a 500 ft (152 m) thru-beam and a 10 ft (3 m) diffuse reflective unit 
• Logic options include ON-delay, OFF-delay, ON/OFF-delay and oneshot delay 
• Fully potted construction for use in areas subject to washdown, high shock and/or vibration
• All units offer light/dark selection

E58 harsh-duty sensors

The E58 harsh duty series by Eaton’s electrical sector was designed to withstand your harshest physical, chemical and optical environments. Extensive research dictated the choice of materials used in this sensor. 

• Highly refined optics provide long sensing ranges through high levels of contamination.
• PerfectProx technology allows for excellent background rejection and high excess gain.
• The industry's only background rejection sensors with a 2-wire circuit design.
• Ideal for automotive applications where exposure to lubricants, cutting fluids, coolants and glycols is common.

There are 3 easy steps to align the sensor. You need to reconnect power to the operator.

1. Align the sensor. Red LED indicates that the sensor is misaligned or blocked. Blue LED indicates that the signal is strength. If there is a slow blinking, it indicates that there is a weak signal and if there is a fast blinking, it indicates that the signal is strong. Solid blue LED indicates an optimal alignment.
2. When the sensor is properly align, tight the sensor bracket screws until it grips the sensor in place.
3. Plice the white cover into the sensor bracket. Make sure the tabson the wire cover slide into the slots on the top of the sensor bracket.