Download document () of 20
Send email
Download
You have exceeded the download limit
1.5kVA 900W Line-Interactive UPS with 8 C13 Outlets - AVR, 230V, C14 Inlet, LCD, USB, Tower
| Product Name |
Eaton Tripp Lite series UPS
|
| Catalog Number |
OMNIVSX1500
|
| UPC |
037332221773
|
| Product Length/Depth |
15.3 in
|
| Product Height |
10.8 in
|
| Product Width |
7.6 in
|
| Product Weight |
22 lb
|
| Compliances |
EAC
RoHS CE Marked |
| Certifications |
IEC/EN 62040-1
|
| Topology |
Line-interactive
|
| Form factor |
Tower
|
| Package contents |
|
| Input nominal voltage |
230 VAC
|
| Nominal frequency |
50/60 Hz
|
| Input frequency range |
50/60 Hz
|
| Receptacle |
C13
|
| Output nominal voltage |
220V default(220/230/240V)
|
| Electric current - max |
6.5
|
| Battery replacement |
RBC51 (qty 2)
|
| Battery type |
Valve Regulated Lead Acid (VRLA)
|
| Runtime at half load |
6.5 min
|
| Noise level |
Less than 40dB front side 1m
|
| Relative humidity |
Up to 90% non-condensing
|
| Front Panel LCD Display |
Touchscreen LCD indicates input voltage, output voltage, output load percentage and battery charge percentage; Supports additional fault reporting (see manual); Touchscreen LCD remains lighted for 20 seconds in line power mode after any user interaction and remains lighted full time in battery mode
|
| Output Receptacles |
C13
|
| Output Receptacles Details |
Compatible with Eaton Tripp Lite Power Cords
|
| Product Highlights |
Protects equipment against blackouts, brownouts, overvoltages, surges and line noise
Easy-to-read LCD touchscreen provides valuable voltage, load and battery data High >95% efficiency with low BTU ratings saves power and lowers your energy costs AVR battery backup allows time to save files and safely shut down during blackouts 8 C13 outlets provide power to PC, home theater or digital signage equipment High >95% efficiency with low BTU ratings saves power and lowers your energy costs |
| PowerAlert Software |
For local monitoring via the UPS’s built-in communication ports, download PowerAlert software at https://tripplite.eaton.com/products/power-alert
|
| Nominal Output Voltage |
220V
230V 240V |
| Network Management Cards Details |
Network management not supported
|
| Phase (input) |
Single-phase
|
| Runtime at full load |
1 min. (900W)
|
| Communication interface |
USB cabling included
USB (HID enabled) |
| Dc Voltage |
24
|
| Operating Temperature Range |
32° to 104°F (0° to 40°C)
|
| Communications Cable |
USB cabling included
|
| Input Circuit Breakers |
10A fuse
|
| High Voltage Transfer to Battery Power |
280V
|
| Low Voltage Transfer to Battery Power |
170V
|
| Undervoltage Correction |
Input voltages between 170 and 207 are boosted by 18%
|
| Application |
|
| Switch configuration |
Power switch offers whole UPS off/on power control
|
| Hot Swap PDU Options |
PDUBHV10 (2U / 8 C13 outlets)
|
| AC suppression joule rating |
312
|
| Housing material |
ABS
|
| Output AC waveform (AC mode) |
Sine wave
|
| Output AC waveform (battery mode) |
PWM sine wave
|
| Output Capacity (kVA) |
1.5
|
| Output Capacity (kW) |
0.9
|
| Output Capacity (VA) |
1500
|
| Primary UPS Depth (mm) |
320
|
| Primary UPS Height (mm) |
183
|
| Primary UPS Width (mm) |
130
|
| AC Suppression Response Time |
Instantaneous
|
| Alarm Interface |
Alarm remains silent in battery power mode until low-battery condition occurs
|
| Audible Alarms |
Audible alarm indicates low-battery condition during battery mode operation
|
| Battery Start Capability |
Cold-start operation supported
|
| Battery Replacement Description |
See manual for battery replacement information
|
| Frequency Rating Details |
Automatic frequency selection
|
| Output Voltage Regulation (Line Mode) |
-13%, +7%
|
| Output Voltage Regulation(Battery Mode) |
±10%
|
| Overvoltage Correction |
Input voltages between 247 and 280 are reduced by 15%
|
| Rechargeable Battery |
Less than 8 hours from 10% to 90%
|
| Storage Temperature |
5° to 122°F (-15° to 50°C)
|
| Network Monitoring Port Description |
Supports detailed monitoring of UPS and site power conditions
|
| Nominal Voltage Details |
230V nominal output in battery mode
|
| Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with a correction range from 170V to 280V
|
| WatchDog Compatibility |
Supports Watchdog application, OS and hard-reboot restart options for remote applications
|
| Maximum Input Amps |
6
|
| UPS Power Module Dimensions |
7.2 x 5.1 x 12.6
|
| Power Mode Transfer Time |
6 milliseconds
|
| EMI AC Noise Suppression |
EMI / RFI AC Noise Suppression
|
| UPS Input Connection Type |
C14 inlet
|
| Green Energy-Saving Features |
Greater than 95% efficiency - GREEN UPS
|
| High Availability UPS Features |
Surge/noise protection
Automatic voltage regulation (AVR) |
Support from Eaton
Product specifications
