Download document () of 20
Send email
Download
You have exceeded the download limit
The addressable sounder beacon base provides options to detect a threat and alert building occupants in a single device.
For detection and notification, it is compatible with Eaton's addressable detectors and limits the number of installation points within a building, making installation faster and more efficient. Mounting the detector is a simple twist and click.
For notification only, it can act as a discreet, standalone fire alarm sounder beacon by using a cover plate instead of a detector.
| Detector sounder beacon base | CASBB384 |
| Optical smoke sensor | CAP320 |
| Photo/thermal sensor | CAPT340 |
| Multi-mode heat sensor | CAH330 |
| Cover plates (pack of 5) | CASC |
| Supply Voltage: | 18 - 32Vdc |
| Cable Size / Type: | 0.5 - 2.5mm / FIRETUF, FP200 or MICC |
| Standby Current: | < 450 uA |
| Operating Temperature: | -10°C to +55°C (95%RH) |
| Material: | ABS / PC FR Plastic |
| Environment Category: | Type A / IP21C |
| Sound Output @ +/-3d8 (set by panel): | Low volume : 83dB @ <6.6mA Medium volume : 90dB @ <8mA High volume : 93dB @ <9mA |
| Compliance: | EN54-3 Fire Alarm Device - Sounder EN54-17:2005 |
| Tones (set by panel): | Continuous 910Hz Pulsed 910 / 0Hz pulse 1Hz Two Tone 610 / 910Hz @ 1Hz cycle Slow whoop 500-1200Hz in 3.5 seconds / 0.5 seconds gap |
| Beacon: | 1Hz Flash |
| Total Loop Resistance for correct operation of short circuit isolator: | 50Ω (max) |
| Parallel Fault Resistance to be seen at the Control Panel for isolators to open: | 200Ω (typ) |
| Continuous Current allowable through isolator: | 700mA (max) |
| Isolator Resistance in closed state: | 0.26Ω (max) |
| Leakage Current into direct short circuit with isolator open: | 14mA (max) |
| Voltage at which isolator changes from open to closed or closed to open state: | 3.8V to 11V |
| Maximum switching current of isolator: | 1.5A |
